Deburring, edge rounding and finishing up to 1100mm
Deburring, edge rounding and finishing of metal cut parts up to 1100mm width.
DM1100 ZCK are deburring, edge rounding and finishing machines for sheet metal and parts cut by punching, shearing, laser or plasma.
Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm.
With the third station it is possible to do a consistent surface finishing in small or large parts in one single pass.
Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface.
Deburring and edge rounding
Cross Belt at 35 degrees
Plastic protection deburring
Fixed working height
|Working capacity (mm)||1100x120|
|No. belt stations (Z)||1|
|No. brush stations (K)||1|
|No. cross belt stations||1|
|Abrasive belt dimensions (mm)||1100x2200|
|Abrasive brush dimensions (mm)||1120xØ200|
|Abrasive belt speed (m/s)||10|
|Abrasive brush speed (m/s)||8|
|Cross belt speed (m/s)||8|
|Feeding speed (m/m)||0.9-13|
|Abrasive belt motor per head (kW)||18.5|
|Abrasive brush motor per head (kW)||9,2|
|Cross Belt Motor (kW)||(2x) 3|
|Feeding motor (kW)||0.37|
|Total power (kW)||36.45|
|Dust extraction connection per head (Ø mm)||(3x) 150|
ASK FOR A QUOTE
this product contact us
by filling the form below.